Turning Off The Alarm Buzzer; Alarm Display; Switching Display (Automatic) - JRC JLN-205MK2 Quick Reference

4.1.8 Turning off the alarm buzzer

Buzzer sound can be turned off by pressing
The buzzer sounds if an alarm occurs.

4.1.9 Alarm display

When an alarm occurs, the event is notified with a popup menu and alarm sound.
When is pressed, the popup menu is cleared and the buzzer sound stops. However, display
of " " remains on the status bar unless the alarm is cancelled.
Even after the popup menu is cleared and the buzzer sound is stopped, the invalid numerical
number keeps blinking until the alarm is cancelled.
To check the alarm again after clearing the popup menu, display the alarm history by referencing
"4.9.12 Displaying an alarm"
4.1.10 Switching display
The display screen is switched whenever
Display3
Display2
(D2)
(D 3)
.
is pressed.
Display4
(D4)
Display1
(D1)
Display5
(D5)
Display6
( D 6)
4-5