JRC JLN-205MK2 Quick Reference page 46

Main menu
Sub-menu1
Sub-menu2
Sub-menu3
4> ALARM
SYSTEM
SPEED
TRIP
SPEED LOST
5> SENSOR
SPEED CORR
NMEA1
NMEA2
PULSE1
PULSE2
PULSE3
SCALE
4-20
The alarm function when an alarm occurs can be set.
・Alarm sound setting
・LCD color switching (White or Orange).
An alarm occurs when the system failure occurs.
【ON, OFF】
An alarm occurs when the ship speed matches the
set parameters.
【 Over, Under, In range, Out range, OFF 】
An alarm occurs when the trip distance matches the
set parameters.
【 Over, OFF 】
An alarm occurs when computation of the vessel
speed is disabled
【ON, OFF】
Sets a function of signal distributer.
Corrects the vessel speed. 【-50.0%～+99.9%】
When + value is set, the displayed value increases.
Sets the output versions of NMEA1 to NMEA4.
【1.5、2.3】
Sets the output versions of NMEA5 to NMEA8.
【1.5、2.3】
Sets the distance pulse output rates of LOG1 and
LOG2.
【0～20×100P/NM】
Sets the distance pulse output rates of LOG3 and
LOG4.
【0～20×100P/NM】
Sets the distance pulse output rate of LOG RELAY.
【0～20×100P/NM】
When 0 is set, the output is stopped.
Adjusts the display scale of the analog vessel
speedometer (optional).
【10～40】
Explanation Default
OFF
OFF
OFF
OFF
+0.0%
2.3
2.3
2×100
P/NM
2×100
P/NM
0×100
P/NM
30kn