JRC JLN-205MK2 Quick Reference page 44

Main menu
Sub-menu1
Sub-menu2
Sub-menu3
DEMO MODE
10> SOFT UPDATE
DISPLAY
11> DISPLAY TYPE
12> RS-485ID
13> DIMMER GROUP
14> DIMMER
15> CURRENT
4-18
To start demonstration, set to "START".
To end demonstration, set to "END".
・ During execution of demonstration, [S] is displayed
in blinking mode at the bottom of the screen.
Display program update.
Setting a model.
・ When the model is set, the setting contents are
initialized.
To identify a display unit on the RS-485 network, set
an ID for each display unit.
Avoid duplication of ID among the display units.
【 1～10 】
Dimmer control linkage is available for the display
units that are connected by the RS-485 network.
・The display of same dimmer group number can be
linked.
【 1～10 】
Selecting a dimmer unit.
【Key(DIM key), EXT DIMMER(External dimmer unit)】
Setting the current layer and data No. to be displayed.
・The layer that can be displayed is up to three layers
from the top.
【 LAYER, DATA No. 】
Explanation Default
-
-
MID
1
1
Key
LAYER