Adjusting The Headlight Beam - Yamaha FZ09E Service Manual

6. Install:
• Headlight bulb
IH4W
Secure the new headlight bulb with the head-
light bulb holder.
NOTICE
~~~~~~~~~~~~~
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
7. Hook:
• Headlight bulb holder
8. Install:
• Headlight bulb cover
9. Connect:
• Headlight coupler "1"
1 O.lnstall:
• Headlight unit "1"
TIP ~~~~~~~~~~~~~~­
lnstall the headlight unit as shown.
1
11.lnstall:
• Headlight unit side cover bolts
EA.$?18 1 0
Headlight unit side cover bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
• Headlight beam (vertically)
PERIODIC MAINTENANCE
TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT
a. Tum the adjusting screw "1" in direction "a" or
''b"'.
Direction " a"
Headlight beam is raised.
Direction "b"
Headlight beam Is lowered.
= =
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
2. Adjust:
• Headlight beam (horizontally)
••••••••••••••••••••••••••••••••
TIP ~~~~~~~~~~~~~~­
To adjust the headlight beam (horizontally), in-
sert a crosshead screwdriver into the hole "a"
and turn the adjusting screw.
a. Turn the adjusting screw "1" in direction "b" or
"c".
Direction "b"
Headlight beam moves to the right.
Direction " c"
Headlight beam moves to the left.
3-30