Yamaha FZ09E Service Manual page 300

3. Install:
• Shift fork-C "1"
• Shift drum assembly "2"
• Shift fork guide bar "3"
TIP ~~~~~~~~~~~~~~-
• The embossed marks on the shift forks should
face towards the right side of the engine and be
in the following sequence: "R", "C", "L".
• Carefully position the shift forks so that they
are installed correctly into the transmission
gears.
• Install shift fork-C into the groove "a" in the 3rd
and 4th pinion gear on the main axle.
4. Install:
• Shift fork-R "1"
• Shift fork-L "2"
• Shift fork guide bar
• Shift drum retainers "3"
• Bearing
• Oil seal
llllll'l!@"'M"I
• Circlip ''4"
ll@i
• Drive axle assembly "5"
Shift drum retainer bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
LOCTITE®
TIP ~~~~~~~~~~~~~~~
• Install shift fork-R into the groove "a" in the 5th
wheel gear and shift fork-L into the groove "b"
in the 6th wheel gear on the drive axle.
• Install the shift drum retainer with its "OUT'
mark "c" facing outward.
TRANSMISSION
• Touch the protrusion "d" on the shift fork guide
bar to the side of the shift drum retainer.
• Make sure that the drive axle bearing circlip "4"
is inserted into the grooves "e" in the upper
crankcase.
s.
Check:
• Transmission
Rough movement
-t
Repair.
TIP ~~~~~~~~~~~~~~~
Oil each gear, shaft, and bearing thoroughly.
5-83