Yamaha FZ09E Service Manual page 145

EA$1AC1«l1
REMOVING THE AIR SCOOPS
1. Remove:
• Air scoop (left) "1"
YTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT
a. Remove the air scoop bolt "2" and quick fas-
teners "3".
b. Pull the air scoop off at the areas "a" shown.
••••••••••••••••••••••••••••••••
2. Remove:
• Air scoop (right) "1"
••••••••••••••••••••••••••••••••
a. Remove the air scoop bolt "2" and quick fas-
teners "3".
b. Pull the air scoop off at the areas "a" shown .
. , /
EA$1AC1«l2
INSTALLING THE AIR SCOOPS
1 . Install:
• Air scoop (left) "1"
YTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT
a. Insert the projection "a" on the air scoop into
the grommet "b" and insert the projection "c"
on the air scoop into the hole "d".
b. Install the air scoop bolt and quick fastener
screws, and then tighten the bolts to specifi-
cation.
Air scoop bolt
1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)
4-5
GENERAL CHASSIS
• •••••••••••••••••••••••••••••••
2. Install:
• Air scoop (right) "1"
TTYTTTYYTTTYTTTYYTTTYTTTYTTTYYTT
a. Insert the projection "a" on the air scoop into
the grommet "b" and insert the projection "c"
on the air scoop into the hole "d".
b. Install the air scoop bolt and quick fastener
screws, and then tighten the bolts to specifi-
cation.
A ir scoop bolt
1.5 Nm (0.15 m-kgf, 1.1 ft·lbf)
INSTALLING THE FUEL TANK MOLES
1. Install:
• Fuel tank mole (left) "1"
••••••••••••••••••••••••••••••••
a. Install the hole "a" in the fuel tank mole onto
the projection "b" on the air scoop stay.