Yamaha FZ09E Service Manual page 225

TIP ~~~~~~~~~~~~~~-
• Tighten the engine mounting adjust bolts to
specification with the pivot shaft wrench and
pivot shaft wrench adapter.
• Make sure that the flange on the engine
mounting adjust bolt contacts the engine.
8. Install:
Engine mounting adjust bolt
(rear)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Pivot shaft wrench
90890-01518
Frame spanner socket
YM-01518
Pivot shaft wrench adapter
90890-01476
• Adapter bolt (right) "9"
(temporarily tighten)
9. Install:
• Engine mounting bolt (right front upper side)
"1 O "
1 O.Tighten:
• Engine mounting nut (rear lower side) "11"
• Engine mounting nut (rear upper side) "12"
Engine mounting nut
45 Nm (4.5 m·kgf, 33 ft·lbf)
11.Tighten:
• Engine mounting bolt (right front upper side)
"1 O "
• Engine mounting bolt (left front upper side)
"6"
• Engine mounting bolt (left front lower side) "7"
• Engine mounting bolt (right front lower side)
Engine mounting bolt
45 Nm (4.5 m·kgf, 33 ft·lbf)
12. Tighten:
• Adapter bolt (left) "5"
• Adapter bolt (right) "9"
Adapter bolt
12 Nm (1.2 m·kgf, 8.7 ft·lbf)
ENGINE REMOVAL
5-8