Routine Maintenance - Renishaw OTS Installation Manual

OTS installation guide

Routine maintenance

The probe is a precision tool and must be
handled with care.
Ensure the probe is firmly secured to its
mounting.
5.4
The probe requires minimal maintenance as it is
designed to operate as a permanent fixture on
CNC machining centres, where it is subject to a
hot chip and coolant environment.
1. Do not allow excessive waste material to
build up around the probe.
2 Coolant residue accumulating on the
transmission window will have a detrimental
effect on transmission performance, see page
5.1.
3. Keep all electrical connections clean.
4. The probe mechanism is protected by an
outer metal eyelid seal and an inner flexible
diaphragm seal.
Approximately once a month, inspect the probe
inner diaphragm seal, see page 5.5. If it is
pierced or damaged please contact Renishaw.
The service interval may be extended or reduced
depending on experience.
www.armata-cnc.ru info@armata-cnc.ru
Front cover
Spring
Probe
module
Metal eyelid seal
Inner diaphragm seal
O ring
+7(495)797-78-97