Ots Specification; Principal Application; Overall Dimensions; Weight - Renishaw OTS Installation Manual

OTS installation guide

OTS specification

Principal application:

Overall dimensions:

½ AA battery type:
2.6
AA battery type:
All battery types:
All battery types:

Weight:

½ AA battery type:
(with disc stylus)
AA battery type:
(with disc stylus)

Operating:

Signal transmission type:
Switch-on method:
Switch-off method:
Operating range:
Receiver/interface:
Sense directions:
Uni-directional repeatability:
Stylus trigger force:
Stylus overtravel:
* Probe module results valid as tested with a 35 mm (1.38 in) straight stylus
and a velocity of 480 mm/min (1.57 ft/min).
§ Factory set using 50 mm (1.97 in) straight stylus.
Tool setting on CNC machining centres
Length with square stylus
Length with square stylus
Width
Height
with batteries
870 g (30.69 oz)
with batteries
950 g (33.51oz)
Infra-red optical transmission
Optical on
Optical off
Up to 5 m (16.4 ft)
OMI-2T, OMI-2 or OMI-2H
Omni-directional ±X, ±Y, +Z
1.0 µm (0.00004 in) 2 sigma (2σ) *
1.3 N to 2.4 N/130 gf to 240 gf (4.5 ozf to 8.5 ozf) §
depending on the sense direction
XY plane
±3.5 mm (0.14 in)
www.armata-cnc.ru info@armata-cnc.ru
122.00 mm (4.08 in)
143.55 mm (5.65 in)
60.00 mm (2.36 in)
103.25 mm (4.06 in)
without batteries
850 g (29.98 oz)
without batteries
900 g (31.75 oz)
+Z direction
6 mm (0.23 in)
+7(495)797-78-97