Renishaw OTS Installation Manual page 44

OTS installation guide
Symptom
Probe fails to switch off
6.4
Probe goes to Trigger
Logic™ set up mode
and cannot be reset
Optical/magnetic interference
Probe out of range
Probe was triggered when
batteries were inserted
www.armata-cnc.ru info@armata-cnc.ru
Cause
Check for interfering lights or
motors
Consider removing the
interfering source
Check that the probe and
receiver windows are clean, and
remove any obstruction
Check position of receiver
Increase receiver signal start
range
Review performance envelopes
Do not touch the stylus during
battery insertion
+7(495)797-78-97
Action