Installing The Batteries - Renishaw OTS Installation Manual

OTS installation guide

Installing the batteries

1
3.4
2
3
www.armata-cnc.ru info@armata-cnc.ru
NOTES:
Select suitable battery type, see page 5.3. If
dead batteries are inadvertently inserted into
the probe, the LEDs will remain a constant red,
see page 4.4.
Do not allow coolant or debris to enter the
battery compartment.
When inserting batteries, check that the battery
polarity is correct.
After inserting the batteries the LEDs will
display the current probe settings.
(for details, see Trigger Logic™ page 4.1).
+7(495)797-78-97