Square Stylus Only - Renishaw OTS Installation Manual

Square stylus only

Square stylus rotational adjustment allows the
stylus to be aligned with the machine axes.
Coarse rotational adjustment
3.9
3
Support bar
Stylus break
stem with
captive link
1
2 mm AF
1.1 Nm
(0.81 lbf.ft)
Slacken grubscrew 1 and rotate the stylus by
hand to obtain alignment, then fully tighten the
grubscrew.
NOTE:
Always hold the support bar in position to
counteract twisting forces and avoid over
stressing the stylus break stem.
www.armata-cnc.ru info@armata-cnc.ru +7(495)797-78-97