OTS installation guide
Positioning the optical module
3.6
The optical module can be set in one of seven
positions at 15° increments, to allow the optical
window to point towards the receiver.
1. To align the optical module, first slacken and
partially pull out the clamp screw.
Reference feature
Body
Clamp screw
4 mm AF
5.1 Nm
(3.76 lbf.ft)
www.armata-cnc.ru
info@armata-cnc.ru
15°
30°
45°
Optical module
2. Rotate the optical module to line up a
reference mark on the optical housing with
the reference feature on top of the body.
3. Re-locate the clamp screw and tighten.
+7(495)797-78-97
0°
15°
30°
45°