Primo system installation guide
Routine tool setter maintenance
Ensure the tool setter is securely mounted and
keep all electrical connections clean. Inspect the
diaphragm once a month.
NOTE: In the event of the diaphragm seal being
damaged, return the tool setter to your supplier for
6.6
repair.
Inspecting the diaphragm seal
1
Remove the stylus/break stem assembly.
3
Remove the metal eyelid and spring.
5
Inspect the diaphragm seal for signs of
piercing or damage.
2
Remove the front cover.
4
Wash the inside of the probe with clean coolant.
6
If there is no damage, reassemble the
tool setter.