Front Panel And Rear Panel - Amcrest NVR11H Quick Start Manual

Front Panel

1. Front Panel and Rear Panel

Front Panel
NVR11H/11H-P/41H/41H-8P
Note: For detailed operating instructions, please refer to the User‟s Manual on the included CD
or found on the product listing online:
The front panel is shown in Figure 1.
Please refer to the following chart for information on the front panel buttons
# Icon
1 ALARM
2 REC
3 HDD
4 NET
5 ACT
6 POWER
7
� / �
8
9 < / >
ENTER
http://amcrest.com/ip-security-camera-systems.html/
Figure 1
Name
Alarm status
indicator light
Recording
status indicator
light
HDD status
indicator light
Network status
indicator light
ENTER
Power status
indicator light
Power button
Up/Down
Left/Right
Enter
NVR11H/11H-P/41H/41H-8P
Function(s)
When an alarm event occurs, this LED becomes
blue to alert you.
When the NVR is recording footage to the hard
drive, this LED will become blue to alert you.
When an HDD error occurs or the HDD capacity is
below the specified threshold, this LED becomes
blue to alert you.
When a network error occurs or there is no network
connection, this LED becomes blue to alert you.
Confirms the current operation.
When the NVR is powered on, this LED will remain
blue.
Press and hold the power button for 3 seconds to
boot up or shut down the NVR.
Activates current controls, modifies settings, and
allows navigating up and down through options.
Increases/Decreases numerals.
-Assists in functions such as PTZ menu.
Shifts current activated controls.
When in playback, use these buttons to control the
playback bar.
Confirms the current operation.
1