Check Packaging; Important Safeguards And Warnings - Amcrest NVR11H Quick Start Manual

Welcome
Thank you for purchasing our NVR!
This quick start guide will help you become familiar with our NVR in a very short time.
Before installation and operation, please read the below safeguards and warnings carefully.
Many of the setup sections below have corresponding videos on YouTube
To access the setup videos, please go to

Important Safeguards and Warnings

●
All installations and operations here should conform to your local electrical safety codes.
●
We assume no liability or responsibility for any of the fires or electrical shocks caused by
improper handling or installation.
●
We are not liable for any problems caused by unauthorized modifications or attempted repair.
●
Improper battery use may result in fire, explosion, or personal injury.
●
When replacing the battery, please make sure you are using the same model.

Check Packaging

When you receive the NVR system in the packaging, unpack it, and check all sides of the NVR to
see if there is any physical damage. The protective materials used for the packaging of the NVR
can protect most accidental damage during transportation, but to ensure that your equipment is
operating as expected, it is recommended to inspect the product before proceeding further.
On the NVR unit, check specifically that the label on the bottom of the NVR is not damaged. The
serial number of the unit is often needed to provide support.
Please check that all required items for your NVR are present and accounted for. To check what
is included with your purchase, go to
find the product you purchased, then scroll down and click the "What‟s Included" tab. If any item
is missing, please contact us as soon as possible so we can send you the missing component(s
http://amcrest.com/videos
http://amcrest.com/ip-security-camera-systems.html/ and