Amcrest NVR11H Quick Start Manual page 33

Motion Detection & Recording Setup
9. Now that you‟ve finished configuring the recording schedules, you may need to
copy these settings over to another channel (or camera). By default, Channel 1 will be
selected when you visit this page. Unless you immediately selected All in the channel
window from step 4 above, note that you can copy these settings directly over to another
channel by clicking Copy down below:
In the Copy window, you can select individual channels for any cameras you have added
to the NVR or select All:
Click OK when finished.
10. When finished on this screen, click Apply to save your changes.
Setting up recording schedules
30