Computer Access Setup
Log in to your NVR‟s built-in (console) interface, open the Main Menu (by left-clicking
1.
once, or right-clicking and choosing
NETWORK
from the
From the left hand navigation panel, click
2.
the right. It is recommended to ensure the port number is at least 5 digits long to prevent
any port conflicts. You can change the port to any 5 digit number that is less than 65535
(e.g. 12345) by clicking the number field, and entering a new port number. Write it down,
then
click Apply.
3. The system will need to reboot for this change to take effect. Click OK.
Setting up NVR Remote Access (away from home)
MAIN MENU
SETTINGS
row:
CONNECTION
from the dropdown, then click
, then locate the HTTP port on
47