Installing The Amcrest Browser Plugin - Amcrest NVR11H Quick Start Manual

Computer Access Setup
5. Write it down. It will look something like "192.168.1.74", although it may vary depending
on your network, router, or service provider.
Note: It does not matter what your IP address looks like. As long as your NVR is connected to
your router with an Ethernet cable, and the DHCP checkbox is checked on the TCP/IP page, the
IP address you write down will be correct.

Installing the Amcrest browser plugin

Once you‟ve followed one of the above methods to get to the login screen for the NVR, follow the
below steps to install the browser plugin on Internet Explorer:
1. On the main login screen, you should see a popup in the center. Click Install.
2. An install button will appear on the bottom of the screen for the plugin: webplugin.exe.
Click Run, then go through the prompts of the install wizard.
3. Once you see the notification along the bottom row. Click the small arrow to the right of
the Allow button, and select Allow for all websites.
Installing the Amcrest browser plugin
44