Amcrest NVR11H Quick Start Manual page 20

Console Setup
Note: Every page from the Startup Wizard that follows can be accessed and modified at any time
through the Main Menu.
To login to the system for the first time, click Next Step and the login screen will appear.
You will be asked to log in for the first time now. Enter your new credentials:
Username: admin
Password: (your new password)
Note: If three failed logins are attempted within a 30 minute time period, the system will set off an
alarm. After five login failures, the account will be locked.
The next screen that comes up is the
the top for Date & Time, as well as Holiday to configure those settings as well. Once you are
satisfied with the settings on this screen, click the Next Step button at the bottom of the screen.
The next screen that comes up is the
reason to change these settings, it's best to leave them as they are. Network access to the NVR
through a computer or mobile app will be covered later on in this guide.
settings screen. Make sure to click the tabs at
GENERAL
settings screen. Unless you have a specific
NETWORK
Startup Wizard walkthrough
17