Amcrest NVR11H Quick Start Manual page 51

Computer Access Setup
4. Once rebooted, login to your NVR again, open the
under
SETTINGS
5. Click
CONNECTION
has changed.
Next, click DDNS from the left navigation panel, check the Enable checkbox, then click
6.
Apply on the bottom-right.
7. Write down the entire Domain Name field, including the white text that
says: .quickddns.com
8. Click UPnP from the left navigation panel, and check the Enable checkbox at the top.
Then, locate row 1 in the Port Mapping List, where HTTP is written beneath Service
Name, and double-click the numbers in the field just below Internal Port to change the
HTTP port numbers.
Setting up NVR Remote Access (away from home)
again.
from the left navigation panel again, and ensure that the HTTP port
, then click
MAIN MENU NETWORK
48