Amcrest NVR11H Quick Start Manual page 38

Motion Detection & Recording Setup
8. Once you have set up your settings for one channel, you can copy them to
another channel. If you did not select All after clicking Channel as described in step 3,
click Copy, select channels to copy to, then click OK:
Click Apply to save all the settings made on this page.
9.
Click the
10.
to the snapshot schedule settings page:
Here, you can set up the snapshot schedule just like you set up the recording schedule.
Please refer to the earlier section of part 5 of this guide: Motion Detection & Recording
Setup > Setting up regular and motion detection recording schedules.
Next, click
11.
under Snapshot to select the desired channels:
tab on the top row, then click
STORAGE
from the left navigation panel, and click the radio buttons
RECORD
Setting up motion detection and email alerts
SCHEDULE
> Snapshot to get
35