Hard Drive Installation - Amcrest NVR11H Quick Start Manual

Hardware Setup

Hard drive installation

A hard drive can be installed if you want to be able to use the NVR to record and save footage
locally (on the NVR). Having a hard drive allows you to configure and use the recording
functionality of this NVR, including playing back previously recorded footage.
The NVR has connections for only 1 hard drive inside the case and the hard drive must be no
bigger than 4TB (Terabytes).
In order to install your hard drive, the following is needed:
●
A medium sized (regular) Phillips-head screwdriver - not included
●
A hard drive - not included
●
Four hard drive fastening screws - included
Note: Before installing the hard drive, make sure the NVR is powered off with the power
cable disconnected.
Hard drive installation
14