Built-In Interface Method - Amcrest NVR11H Quick Start Manual

Computer Access Setup

Built-in interface method

1. Boot up and log into your NVR system (as explained in previous steps of this guide).
2. Left-click on the main 4-window screen to access the Main Menu, or right-click and
choose it from the list.
3. Click the Network icon, in the third bottom-most row, to the right of Settings.
4. On the NETWORK settings page, you will start on the TCP/IP tab on the left panel list of
options. Locate where it says IP Address on the main center page of the window.
Built-in interface method
43