Table of Contents
Advertisement
Note:
First, connect the HDD data (SATA) cable and the power cable before positioning the HDD in
the DVR.
Please pay attention to the front cover. It adopts a vertical sliding design. You need to push
the clip first and then push down.
4. Front Panel Controls
The controls on the front panel include:
1. USB Ports: Universal Serial Bus (USB) ports for additional devices such as a USB mouse and
USB Hard Disk Drive (HDD).
2. POWER: POWER indicator lights on when DVR is powered on.
3. HDD: HDD indicator lights up when the hard drive is active and, flashes rapidly when recording.
4. IR Receiver: Receiver for IR remote.
5. Function buttons:
a) Play / pause button is used for playback control
b) ALL button is used to live-view all the channels
c) Menu button is used to pop-up the main menu
d) Select button is used to confirm selection in any of the menu modes
6. Directional Arrows: DIRECTION buttons are used to navigate between different fields and items
in menus. In Preview mode, these buttons can be used to cycle through channels.
Advertisement
Table of Contents
