Amcrest NVR11H Quick Start Manual page 30

Motion Detection & Recording Setup
3. Make sure you are on the
configure the times and days you would like different kinds of recordings to happen.
4. To choose a channel (or camera) for which to configure the recording schedules,
click the number next to Channel, then select either a single channel or All:
5. By default, the NVR will have the schedule configured to record regularly 24/7.
Notice the green bars going across each day of the week. Also note that the NVR uses
military time, that is, from 0 to 24 instead of from 12 a.m. to 12 a.m.
> Record page. This is where you can
SCHEDULE
Setting up recording schedules
27