Amcrest NVR11H Quick Start Manual page 31

Motion Detection & Recording Setup
To change which hours you would like the NVR to record, make sure the Regular
checkbox is checked, then click the blocks in the grid. You can also click and drag to add
or remove multiple block at a time. Each block represents one hour:
Click the trash can icon to the right of any day to clear the entire row of all green blocks.
6. To add or remove motion detection blocks to the grid, mark the checkbox next to
MD, then click individual cells or click-and-drag for multiple blocks:
7. To the left of each day, there are small boxes which can be marked to "link"
different days together. This is useful if you want to save time by instantly making
changes to multiple days simultaneously.
Setting up recording schedules
28