Amcrest NVR11H Quick Start Manual page 26

Console Setup Using the device search method
The NVR will automatically use the default username and password of "admin" and
"admin", respectively. However, it is strongly recommended to change the default
password to secure your cameras.
Changing the password for your IP cameras can only be done by accessing them
individually through their built-in interfaces by using their IP addresses. It cannot be done
through this NVR. The NVR will only accept the current username and password to be
able to pull the stream through.
In order to access the camera‟s interface to change the username and password, please
refer to the manufacturer's documentation for that camera.
Once finished updating the password, you can come back to this device search screen
on the NVR and click pencil icon under Modify once a camera has been added to the
Added Device list. This will bring up a screen where you can update the username and
password.
When finished adding cameras and entering the correct login credentials, the live stream
should appear behind the setup screen in the background as shown above. Make sure to
click Save, then Apply before closing this window.
23