Motion Detection & Recording Setup
Setting up motion detection and email alerts
Your NVR will only save motion detection recordings if you have a hard drive installed. However,
you can still receive email alerts with snapshots without a hard drive installed.
1.
Log into your NVR with your username and password:
Open the
2.
Make sure you are on the
3.
configuration page for motion detection:
Change your channel (or camera) by clicking Channel and selecting from any cameras
currently added to the NVR. You can also select All. Make sure the Enable checkbox is
checked. Then, click Setup next to Region to configure the motion detection areas.
, then click
MAIN MENU
DETECT
Setting up motion detection and email alerts
in the
EVENT
SETTINGS
> MotionDetect page. This is the main
row:
31