Advertisement
Welcome
Thank you for purchasing our Amcrest HDCVI DVR!
This quick start guide will help you become familiar with our DVR in a very short time.
Before installation and operation, please read the following safeguards and warnings carefully!
Important Safeguards and Warnings
All installations and operations here should conform to your local electrical safety codes.
We assume no liability or responsibility for any of the fires or electrical shocks caused by
improper handling or installation.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
Improper battery use may result in fire, explosion, or personal injury!
When replacing the battery, please make sure you are using the same model!
Note: All the installations and operations here should conform to your local
electric safety rules.
1. Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the packaging of the DVR can protect most accidental
disturbances during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list on the warranty card. Finally you can remove
the protective film from the DVR.
2. About Front Panel and Rear Panel
For detailed information about the function keys on the front panel and the ports on the rear
panel, please refer to the User's Manual included in the resource CD.
The model on the front panel is very important. Please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to present the serial
number when we provide the service after sales.
3. HDD Installation
This series DVR has only one SATA HDD. Please use a HDD of 7200rpm or higher.
You can refer to the User's Manual for recommended HDD brands.
Please follow the instructions below to install hard disk.
2
Advertisement
