Amcrest NVR11H Quick Start Manual page 22

Console Setup Startup Wizard walkthrough
drive installed - which will be covered later in this guide). You can also use this screen to set up
motion detection and alarm schedules. Once you are satisfied with the settings on this screen,
click the Finished button at the bottom of the screen.
Once the setup process is finished and you have clicked the "Finished" button, you should see
the below dialog box:
Click OK to continue and the next screen you will reach will be the home 4-window (4-channel)
screen for your system.
Before following this guide to the next step, that covers the main menu, you will need to left-click
once or right-click and select „Main Menu‟ from the right-click menu.
19