Table of Contents
Advertisement
Welcome
Thank you for purchasing an Amcrest DVR!
This document is designed as a reference tool only for the installation and operation of your DVR.
To access and download the full user manual for your DVR, please go to amcrest.com/support.
Important Safeguards and Warnings
Use of this product should conform to your local electrical safety codes.
We assume no liability or responsibility for any of the fires or electrical shocks caused by improper
handling or installation.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
Improper battery use may result in fire, explosion, or personal injury.
When replacing the battery, please make sure you are using the same model.
Check Packaging
When you receive the system, unpack it, and check all sides of the DVR to see if there is any
damage to the unit. The protective materials used for the packaging of the DVR can protect most
accidental damage during transportation, but to ensure that your equipment is operating as
expected, it is recommended to inspect the product before proceeding further.
On the DVR unit, please verify that the label on the bottom of the DVR is not damaged. The serial
number of the unit is often needed to provide support or other functions such as connecting to the
Amcrest View Pro app.
Front/Back Panel Diagrams & Descriptions
Front Panel
Please refer to the following chart for information on the front panel buttons.
Icon
Name
Network abnormality indicator light
NET
Power indicator
PWR
HDD
HDD abnormal indicator light
USB 2.0 Port
Function
When a network error occurs or there is no network
connection, this light turns red.
When DVR is on, this light remains on.
When an HDD error occurs, or the HDD capacity is
below the specified threshold value, this light turns red.
USB 2.0 port: connect a mouse, USB storage device,
etc.
3
Advertisement
Table of Contents
