Defining Users - Cisco 500 series Administration Manual

Configuring Security

Defining Users

Defining Users
NOTE
Cisco 500 Series Stackable Managed Switch Administration Guide
• Configuring RADIUS
• Configuring Port Security
• Configuring 802.1X
• Defining Time Ranges
Protection from other network users is described in the following sections. These
are attacks that pass through, but are not directed at, the switch.
• Denial of Service Prevention
• Configuring TCP/UDP Services
• Defining Storm Control
• Configuring Port Security
• IP Source Guard
• Dynamic ARP Inspection
• Access Control
The default username/password is cisco/cisco. The first time that you log in with
the default username and password, you are required to enter a new password.
Password complexity is enabled by default. If the password that you choose is not
complex enough (Password Complexity Settings are enabled in the Password
Strength page), you are prompted to create another password.
Setting User Accounts
User Accounts
The page enables entering additional users that are permitted to
access to the switch (read-only or read-write) or changing the passwords of
existing users.
After adding a level 15 user (as described below), the default user is removed
from the system.
It is not permitted to delete all users. If all users are selected, the Delete button is
disabled.
To add a new user:
18
300