Cisco 500 series Administration Manual page 163

Port Management
Configuring Green Ethernet
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco 500 Series Stackable Managed Switch Administration Guide
The window displays the Short Reach, Energy Detect and EEE
NOTE
settings for each port; however, they are not enabled on any port unless they
are also enabled globally by using the Properties page. To enable Short
Reach and EEE globally, see
Select a Port and click Edit. The Edit Port Setting page opens.
Select to enable or disable Energy Detect mode on the port.
Select to enable or disable Short Reach mode on the port if there are GE ports on
the device.
Select to enable or disable 802.3 Energy Efficient Ethernet (EEE) mode on the port
if there are GE ports on the device.
Select to enable or disable 802.3 Energy Efficient Ethernet (EEE) LLDP mode on
the port (advertisement of EEE capabilities through LLDP) if there are GE ports on
the device.
Click Apply. The Green Ethernet port settings are written to the Running
Configuration file.
Setting Global Green Ethernet
10
Properties.
163