Cisco 500 series Administration Manual page 83
Stackable managed switch
Hide thumbs
Also See for 500 series:
- Configuration manual (1140 pages) ,
- Administration manual (653 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
General Administrative Information
System Information
Cisco 500 Series Stackable Managed Switch Administration Guide
•
Firmware MD5 Checksum (Non-active Image)—MD5 checksum of the
non-active image.
•
Boot Version—Boot version number.
•
Boot MD5 Checksum—MD5 checksum of the boot version.
•
Locale—Locale of the first language. (This is always English.)
•
Language Version—Language package version of the first or English
language.
•
Language MD5 Checksum—MD5 checksum of the language file.
TCP/UDP Services Status:
•
HTTP Service—Displays whether HTTP is enabled/disabled.
•
HTTPS Service—Displays whether HTTPS is enabled/disabled.
•
SNMP Service—Displays whether SNMP is enabled/disabled.
•
Telnet Service—Displays whether Telnet is enabled/disabled.
•
SSH Service—Displays whether SSH is enabled/disabled.
PoE Power Information on Master Unit:
•
Maximum Available PoE Power (W)—Maximum available power that can
be delivered by the PoE.
•
Total PoE Power Consumption (W)—Total PoE power delivered to
connected PoE devices.
•
PoE Power Mode—Port Limit or Class Limit.
Detail
There is a
link next to PoE Power Information on Master Unit that, when
selected, takes you directly to the
page shows the PoE power information on a per-unit basis.
The units in the stack are displayed graphically, along with the following
information for each unit:
•
Unit ID of Master Unit
•
Model Description—Switch model description.
•
Serial Number—Serial number.
•
PID VID—Part number and version ID.
Port Management > PoE > Properties
6
page. This
83
Advertisement
Table of Contents
