Cisco 500 series Administration Manual page 161

Stackable managed switch
Hide thumbs Also See for 500 series:
Table of Contents

Advertisement

Port Management
Configuring Green Ethernet
STEP 3
STEP 1
Cisco 500 Series Stackable Managed Switch Administration Guide
Energy Detect Mode—Disabled by default. Click the checkbox to enable.
Short Reach—Globally enable or disable Short Reach mode if there are GE
ports on the switch.
If Short Reach is enabled, EEE must be disabled.
NOTE
Power Savings—Displays the percentage of power saved by running
Green Ethernet and Short Reach. The power savings displayed is only
relevant to the power saved by Short Reach and Energy Detect modes. The
EEE power savings is dynamic by nature since it is based on port utilization
and is therefore not taken into consideration.
Cumulative Energy Saved—Displays the amount of energy saved from the
last switch reboot. This value is updated each time there is an event that
affects power saving.
802.3 Energy Efficient Ethernet (EEE)— Globally enable or disable EEE
mode (only available if there are GE ports on the switch).
Port LEDs—Select to enable the port LEDs. When these are disabled, they
do not display link status, activity, etc.
Click Apply. The Green Ethernet Properties are written to the Running
Configuration file.
Setting Green Ethernet Properties for Ports
The Port Settings page displays the current Green Ethernet and EEE modes per
port, and enables configuring Green Ethernet on a port using the Edit Port Setting
page. For the Green Ethernet modes to operate on a port, the corresponding
modes must be activated globally in the Properties page.
Note that EEE settings are only displayed for devices that have GE ports. EEE
works only when ports are set to Auto negotiation. The exception is that EEE is still
functional even when Auto Negotiation is disabled, but the port is at 1GB or higher.
To define per port Green Ethernet settings:
Click Port Management > Green Ethernet> Port Settings. The Port Settings
page opens.
The Port Settings page displays the following:
Global Parameter Status—Describes the enabled features.
10
161

Advertisement

Table of Contents
loading

Table of Contents