Cisco 500 series Administration Manual page 129

Configuring Discovery
Configuring LLDP
STEP 2
Cisco 500 Series Stackable Managed Switch Administration Guide
• Time to Live—Time interval (in seconds) after which the information for this
neighbor is deleted.
Select a local port, and click Details. The
This page displays the following fields:
Port Details
• Local Port—Port number.
• MSAP Entry—Device Media Service Access Point (MSAP) entry number.
Basic Details
• Chassis ID Subtype—Type of chassis ID (for example, MAC address).
• Chassis ID—Identifier of the 802 LAN neighboring device chassis.
• Port ID Subtype—Type of the port identifier that is shown.
• Port ID—Identifier of port.
• Port Description—Information about the port, including manufacturer,
product name and hardware/software version.
• System Name—Name of system that is published.
• System Description—Description of the network entity (in alpha-numeric
format). This includes the system name and versions of the hardware,
operating system, and networking software supported by the device. The
value equals the sysDescr object.
• Supported System Capabilities—Primary functions of the device. The
capabilities are indicated by two octets. Bits 0 through 7 indicate Other,
Repeater, Bridge, WLAN AP, Router, Telephone, DOCSIS cable device, and
station, respectively. Bits 8 through 15 are reserved.
• Enabled System Capabilities—Primary enabled function(s) of the device.
Management Address Table
• Address Subtype—Managed address subtype; for example, MAC or IPv4.
• Address—Managed address.
• Interface Subtype—Port subtype.
• Interface Number—Port number.
Neighbors Information
9
page opens.
129