Defining Users - Cisco 500 Series Administration Manual

21

Defining Users

429
• Configuring TACACS+
• Configuring RADIUS
• Configuring Port Security
• 802.1X
• Time Range
Protection from other network users is described in the following sections. These
are attacks that pass through, but are not directed at, the device.
• Denial of Service Prevention
• DHCP Snooping
• SSL Server
• Defining Storm Control
• Configuring Port Security
• IP Source Guard
• ARP Inspection
• Access Control
• First Hop Security
The default username/password is cisco/cisco. The first time that you log in with
the default username and password, you are required to enter a new password.
Password complexity is enabled by default. If the password that you choose is not
complex enough (Password Complexity Settings are enabled in the Password
Strength page), you are prompted to create another password.
Setting User Accounts
The User Accounts page enables entering additional users that are permitted to
access to the device (read-only or read-write) or changing the passwords of
existing users.
After adding a level 15 user (as described below), the default user is removed
from the system.
Cisco 500 Series Stackable Managed Switch Administration Guide
Security
Defining Users