Cisco 500 series Administration Manual page 475

RIP
Configuring RIP
STEP 4
STEP 5
Cisco 500 Series Stackable Managed Switch Administration Guide
Both the Accept Life Time and the Send LifeTime values can be
NOTE
entered. The Accept Life Time indicates when the key-identifier for receiving
packets is valid. The Send Life Time indicates when the key-chain for
sending packets is valid. The fields are only described for the Accept Life
Time. The Send Life Time has the same fields.
• Accept Life Time—Specifies when packets with this key are accepted.
Select one of the following options.
- Always Valid—No limit to the life of the key-identifier.
- User Defined—Life of the key-chain is limited. If this option, is selected
enter values in the following fields.
• Start Date—Enter the earliest date that the key-identifier is valid.
• Start Time—Enter the earliest time that the key-identifier is valid on the Start
Date.
• End Time—Specifies the last date that the key-identifier is valid. Select one
of the following options.
- Infinite—No limit to the life of the key-identifier.
- Duration—Life of the key-identifier is limited. If this option, is selected
enter values in the following fields.
• Duration—Length of time that the key identifier is valid. Enter the following
fields:
- Days—Number of days that the key-identifier is valid.
- Hours—Number of hours that the key-identifier is valid.
- Minutes—Number of minutes that the key-identifier is valid.
- Seconds—Number of seconds that the key-identifier is valid.
To always display sensitive data as plaintext (and not in encrypted form), click
Display Sensitive Data as Plaintext.
Click Apply. The settings are written to the Running Configuration file.
27
475