Cisco 500 series Administration Manual page 439
Stackable managed switch
Hide thumbs
Also See for 500 series:
- Configuration manual (1140 pages) ,
- Administration manual (653 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Configuring Quality of Service
Managing QoS Statistics
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 500 Series Stackable Managed Switch Administration Guide
•
Out-of-Profile Bytes—Number of out-profile bytes received.
Click Add. The Add Single Policer Statistics page is displayed.
Enter the parameters.
•
Interface—Select the interface for which statistics are accumulated.
•
Policy Name—Select the policy name.
•
Class Map Name—Select the class name.
Click Apply. An additional request for statistics is created and the Running
Configuration file is updated.
Viewing Aggregated Policer Statistics
To view aggregated policer statistics:
Click Quality of Service > QoS Statistics > Aggregate Policer Statistics. The
Aggregate Policer Statistics page is displayed.
This page displays the following fields:
•
Aggregate Policer Name—Policer on which statistics are based.
•
In-profile bytes—Number of in-profile packets that were received.
•
Out-of-profile bytes—Number of out-of-profile packets that were received.
Click Add and the Add Aggregate Policer Statistics page is displayed.
Select an Aggregate Policer Name, one of the previously-created Aggregate
Policers for which statistics are displayed.
Click Apply. An additional request for statistics is created, and the Running
Configuration file is updated.
Viewing Queues Statistics
The Queues Statistics page displays queue statistics, including statistics of
forwarded and dropped packets, based on interface, queue, and drop
precedence.
25
439
Advertisement
Table of Contents
