Cisco 500 series Administration Manual page 226

VLAN Management
Voice VLAN
STEP 1
STEP 2
Cisco 500 Series Stackable Managed Switch Administration Guide
Configuring Voice VLAN Properties
Voice VLAN Properties
Use the
• View how voice VLAN is currently configured.
• Configure the VLAN ID of the Voice VLAN.
• Configure voice VLAN QoS settings.
• Configure the voice VLAN mode (Telephony OUI or Auto Voice VLAN).
• Configure how Auto Voice VLAN is triggered.
To view and configure Voice VLAN properties:
Click VLAN Management > Voice VLAN > Properties. The
displayed.
• The voice VLAN settings configured on the switch are displayed in the Voice
VLAN Settings (Administrative Status) block.
• The voice VLAN settings that are actually being applied to the voice VLAN
deployment are displayed in the Voice VLAN Settings (Operational Status)
block.
Enter values for the following fields:
• Voice VLAN ID—Enter the VLAN that is to be the Voice VLAN.
Changes in the voice VLAN ID, CoS/802. 1 p, and/or DSCP cause the
NOTE
switch to advertise the administrative voice VLAN as a static voice VLAN. If
the option Auto Voice VLAN Activation
selected, then the default values need to be maintained.
• CoS/802.1p —Select a CoS/802. 1 p value that to be used by LLDP-MED as
a voice network policy. Refer to
MED Network Policy
• DSCP—Selection of DSCP values that to be used by the LLDP-MED as a
voice network policy. Refer to
MED Network Policy
• Dynamic Voice VLAN—Select this field to disable or enable voice VLAN
feature in one of the following ways:
Enable Auto Voice VLAN
-
VLAN mode.
page for the following:
triggered by external Voice VLAN is
Administration > Discovery > LLDP > LLDP
for additional details.
Administration > Discovery > LLDP > LLDP
for additional details.
—Enable Dynamic Voice VLAN in Auto Voice
13
Properties
page is
226