SimTech ProFlame 1 Troubleshooting Manual page 45

SUREFIRE ELECTRONIC IGNITION SYSTEM
S.I.T. PROFLAME 2 TROUBLESHOOTING
Diagram 13
Check the batteries are installed correctly in the handheld transmitter (3 x AAA) and the receiver (4 x AA)
Remote Handheld
Diagram 13a Volts DC Test (VDC)
Check the battery voltage at the X5 terminal.
While 4.4 vdc is the minimum voltage to operate it is recommended to change the batteries at 5 vdc or lower.
SimTech Proflame II
Power in to IFC
Receiver Batteries
45