Command Lists; Overview - Siemens SIWAREX WP241 Manual

Electronic weighing system

Table of Contents

Command lists

10.1

The commands for the electronic weighing system described here can be transmitted by

several interfaces:

● by the Operator Panel via the controller to the SIWAREX module

● by the Operator Panel directly to the SIWAREX module

● by SIWATOOL directly to the SIWAREX module

● by the digital inputs after corresponding assignment in data record DR 7

A data or command error is signaled if a command cannot be executed or if the sent data

record is rejected.

Detailed descriptions of the commands can be found in the following command lists:

→ Table 10-1 Commands 1 ... 99: Service commands (Page 148)

→ Table 10-2 Commands 450 ... 499: Trace commands (Page 150)

→ Table 10-3 Commands 700 ... 899: HMI display switchover (DR34 – ASCII display)

(Page 150)

→ Table 10-4 Commands 1000 ... : Basic functions for weighing commands (Page 151)

→ Table 10-5 Data record commands of SIWAREX WP241 (Page 151)

→ Table 10-6 Totalizing commands of SIWAREX WP241 (Page 152)

Table of Contents