8.22.1
Current weight
The current material weight of the loaded belt resting on the scale. The output is made in the
selected weight unit from the belt load.
8.22.2
Current belt load
The current material weight of the loaded belt acting on one unit of the weigh length.
8.22.3
Current belt load in %
Current belt load in % of nominal belt load
8.22.4
Current flow rate
The current material flow rate (belt load x speed).
8.22.5
Current flow rate in %
The current material flow rate (belt load x speed) in % of the nominal flow rate.
8.22.6
Current speed
The current speed used to calculate the material flow rate. The output is made as length per
second.
8.22.7
Current speed in %
The current speed used to calculate the material flow rate. The output is made in % of the
maximum speed.
8.22.8
Current master totalizer (S1)
The total material flow is summed after the start-up and switching-off of service mode.
Resetting the total is only possible using the "Load factory settings" command.
SIWAREX WP241
Manual, 04/2014, A5E33713528A
Scale parameters and functions of the belt scale
8.22 DR 30 Process state
125