Siemens SIWAREX WP241 Manual page 72

Scale parameters and functions of the belt scale
8.3 DR 3 Belt scale parameters
Variable
Simulation mode
(Page 78)
Warm-up timer
(Page 78)
Interface for the legal
trade display
(Page 78)(available
soon)
Software version for
HMI SecureDisplay
with verification
capability
(Page 79)(available
soon)
Minimum display size
in % of the HMI
SecureDisplay with
verification capability
(Page 79)
(available soon)
Reserve
Parameter for calculation of calibration points
1)
72
Note
Simulation (is enabled or disabled
via commands)
0: Simulation not permitted
1: Only weight simulation
permitted, weight is imported from
DR16 if simulation mode is enabled
2: Only speed simulation permitted,
speed is imported from DR16 if
simulation mode is enabled
3: Both permitted
Weight and speed are imported
from DR16 if simulation mode is
enabled
Status bit in DR30 "Warm-up time
running" remains TRUE for the
specified time (minutes)
0: HMI SecureDisplay at
ETHERNET
1: HMI SecureDisplay via S7
interface
HMI SecureDisplay string header
version
HMI SecureDisplay version
HMI SecureDisplay with verification
capability
Type L Rw Default
USHORT 2 rw 0
USHORT 2 rw 30
USHORT 0 rw 0
UBYTE[2] 2
CHAR[12] 12 V1.05.02
USHORT
USHORT
Min. Max. Register
1048
1049
1050
1051
1052
1058
SIWAREX WP241
Manual, 04/2014, A5E33713528A