Dr 31 Process State Extended - Siemens SIWAREX WP241 Manual

8.23

DR 31 Process state extended

Current states and process values in the scales can be monitored using advanced process
values and process values (DR 30). This data is not required for standard operation of the
scales.
Monitoring selected data during trial operation is extremely useful as it helps you to optimize
parameters.
Procedure
● Read data record DR 31
● Display/analyze the required tags
Table 8- 21 Assignment of data record 31
Variable Note
Data record number Contains no. of data record
Length Data record length information
Application Information about which application the
data record belongs to
Version identifier Information about current data record
version
Unfiltered digit value Unfiltered digit value from A/D converter
(Page 128)
Filtered digit value Filtered digit value from A/D converter
(Page 128)
Current load cell Actual input voltage in mV calculated
signal (mV) from the input digits
(Page 128)
Current analog Actual current to be output in mA at the
output (mA) analog output
(Page 129)
Pulses per belt Pulses per belt revolution
revolution
(Page 129)
Reserve
Pulses per second at Determined using command "Start belt
nominal speed revolution detection"
(Page 129)
Pulses per second
(Page 129)
Reserve Reserve
Reserve Reserve
Reserve Reserve
Current status of Current status of input .0
input .0
Current status of Current status of input .0
input .1
SIWAREX WP241
Manual, 04/2014, A5E33713528A
Scale parameters and functions of the belt scale
8.23 DR 31 Process state extended
Type L Rw Default
USHORT 2 r 31
USHORT 2 r 54
USHORT 2 r 104
USHORT 2 r 1
LONG 4 r 0
LONG 4 r 0
LONG 4 r 0
USHORT 2 r 0
LONG 4 r 0
FLOAT 4 r 0
FLOAT 4 r 0
USHORT 2 r 0
USHORT 2 r 0
USHORT 2 r 0
USHORT 2 r 0
BIT 0 r 0
BIT 0 r 0
Min Max. Register
.
- - 3300
- - 3301
- - 3302
1 65635 3303
- - 3304
- - 3306
- - 3308
0 65535 3310
0 3312
0 3314
3316
0 65535 3318
0 65535 3319
0 65535 3320
0 65535 3321
0 1 3322.16
0 1 3322.15
127