7.6
Service with SIWATOOL software
You can use the SIWATOOL program to commission the scale independently of the
SIMATIC automation system.
The program is included in the optional configuration package (7MH4960-4AK01).
Install the SIWATOOL program on your PC for commissioning.
A document for commissioning of the belt scale using SIWATOOL is also available in the
Siemens Customer Support.
7.6.1
Windows and functions of SIWATOOL
①
②
Figure 7-16
Sending/receiving a data record is always carried out by right-clicking on the data record
name in the "Value" column in the tree structure.
SIWAREX WP241
Manual, 04/2014, A5E33713528A
Control elements for SIWATOOL and
operation of the scale
Parameter list of the SIWATOOL module
Layout of the SIWATOOL user interface
7.6 Service with SIWATOOL software
③
Offline values of the SIWAREX module
④
Online values of the connected SIWAREX
module
Commissioning
61