Siemens SIWAREX WP241 Manual page 152

Command lists
10.2 Command lists
Table 10- 6 Totalizing commands of SIWAREX WP241
Command Command
code
651 Start totalizing
652 Stop totalizing
670 Reset main totalizer S2
671 Reset totalizer S3
672 Reset totalizer S4
673 Reset totalizer S5
674 Reset totalizer S6
675 Reset totalizers S3...S6
152
Description
Starts the totalizing. In the basic state, totalizing of the module is always
active and must be specifically deactivated by the user (command 652).
Stops all totalizers except totalizer S6. Can be used for (material) tests which
should not be included in the total balance.
Resets the main totalizer to 0
Resets totalizer 3 to 0
Resets totalizer 4 to 0
Resets totalizer S5 to 0
Resets totalizer S6 to 0
Simultaneously resets totalizers S3 to S6 to 0
SIWAREX WP241
Manual, 04/2014, A5E33713528A