Siemens XC1001-A Installation And Maintenance Manual page 53

9.4.3 Mainboard
Building Technologies
Fire Safety
Key N° Description
Silence internal buzzer
1
è
Operating access level required for this operation: level 1 or level 2
è
This operation silences the repeater buzzer only, not the XC10 buzzer
Led and buzzer test (duration = 5 seconds):
All led indicators are switched on and the internal buzzer sounds continuously
2
è
Operating access level required for this operation: level 1 or level 2
è
This operation starts the repeater led test only, not the XC10 led test
Remote control of the XC10 « Mode of operating », by successive pressing:
– 1st pressing:
– 2nd pressing:
3
– 3rd pressing:
è
Operating access level required for this operation = level 2
è
Status indication on XC10 is automatically updated
Remote control of the XC10 « Silence / Re-sound sounders », by successive pressing:
– 1st pressing:
– 2nd pressing:
– 3rd pressing:
4
– etc
è
Operating access level required for this operation : level 2 (silence sounders is not
possible during pre-discharged warning time)
è
Status indication on XC10 is automatically updated
Operating access level is selected with the KABA key:
- key on the vertical position: operating access level 1
5
- key on the horizontal position: operating access level 2 (in this position, the key cannot
be removed)
Fig. 37 XT/XTA1001-A1 – XT/XTA1002-A1 mainboard
Id Function
SW1 Switch for operating access level 2 (XT/XTA1002-A1 only)
SW3 Rotary switch for selection of the repeater address
SW4 Reset
SW5 RTNet end of line element (factory setting: ON)
ST3 / ST4 RTNet (RS485)
ST5 External power supply fault
ST6 / ST7 24V power supply
1 9V battery connector
2 Internal buzzer
automatic blocked
automatic and manual blocked
normal mode
silence sounders
restart sounders
silence sounders
Accessories
53
A6V10257473_e_en_--
2015-03-04