Siemens XC1001-A Installation And Maintenance Manual page 101

XC1001-A / XC1005-A
1116
Siemens SAS
617 rue Fourny, FR-78530 Buc
09
1116 – CPD – 043
EN12094-1:2003
Fixed firefighting systems - Components for gas extinguishing systems
Part 1: Requirements and test methods for electrical automatic control and delay devices
Environmental class A
Number of flooding zones : 1
Extinguishing agent : ..............................................................................................
4.17 : Delay of extinguishing signal
4.18 : Signal representing the flow of extinguishing agent
4.19 : Monitoring of the status of components
4.20 : Emergency hold device
4.21 : Control of flooding time
4.23 : Manual only mode
4.24 : Triggering signals to equipment within the system
4.26 : Triggering of equipment outside the system
4.27 : Emergency abort device
4.30 : Activation of alarm devices with different signals
Response delay activated condition: maximum 3 s
Response delay triggering of outputs: maximum 1s
EN54-2/A1:2007
Fire detection and fire alarm systems - Part 2 : Control and indicating equipment
7.8 : Output to fire alarm devices
7.9 : Control of fire alarm routing equipment (7.9.1)
7.12 : Dependencies on more than one alarm signal – Type A (7.12.1)
7.13 : Alarm counter (XC1005-A)
8.3 : Fault signals from points
8.4 : Total loss of the power supply
8.9 : Output to fault warning routing equipment
10 : Test condition